Haining Idol Imp. & Exp. Co., Ltd.
HAINING IDOL IMP. & EXP. CO.,LTD
Add to Cart
Ladies' polished gunmetal zip through black pleather jacket with quilting TW75779
Description
|
Shell fabric
|
100%PU/Polyurethane with 100%viscose base, 310-330gsm |
|
Lining
|
DTM 210T |
Trims list
| Trim | Position | quantity | Size | Color |
|
Metal zip
|
CF, side pocket, cuff | 5 | #5 | polished gunmetal |
|
Branded Puller
|
CF, side pocket, cuff | 5 | polished gunmetal |
Styling Details:Collar:
- Folded shirt collar and collar stand with twin needle top stitching.
Front:
- Centre front #5 zip with piping and twin needle top stitching
- x1 panel line 3.5cm away from CF zip on both sides with twin needle top stitching
- x2 princess panel lines on either side of CF zip with twin needle top stitching
- x2 13cm long slanted functional side pockets with piping
- 2cm hem
- Slanted yoke seams with stitch detail.
- Spacing between each line to be 1cm
- Overarm to have same stitch detail as yoke.
- Spacing between each line to be 1cm.
- Full panel of detail to measure 20cm in length
Sleeves:
- Long sleeves
- Front sleeve to have x 1 panel line with twin needle top stitching
- Deep cuff line (14.5cm from end of sleeve) with twin needle top stitching
- Outer cuff to have same stitch detail as overarm and shoulders.
- Spacing between each line to be 1cm
- All top stitching to be self colour
- All trims to be polished gunmetal in colour
- All zips on body (x3) to have same ring pullers, size of ring to measure 2cm diameter
- Zips on sleeves (x2) to have same bar ring pullers.
- Length of each bar to be 3cm each
Back:
- Centre back seam with twin needle top stitching on both side.
- Princess panel lines with twin needle top stitching
- Lower back shaped panel to be positioned between princess panel lines and to measure 12cm deep from hem at highest point
- Hem to be 2cm
- Back of sleeve to have x1 panel line with twin needle top stitching
- Back of sleeve to each have x1 14.5cm functional zip with piping
Inside:
- Style to be fully lined in DTM poly lining
- To have pu fabric hanger loop
- To have back neck buggy in pleather as per sample.
- Buggy size to measure 8cm deep at lowest point.
Branding:
unbranded trims
All metal hardware to be polished gunmetal color.
All stitching thread to be DTM.
Spec
| MEASUREMENTS | Tolerances | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 42 | 44 |
| Collar Depth @ Centreback Neck | 0/0 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 |
| Collar Leading Edge | 0/0 | 7 | 7 | 7 | 7 | 7 | 7 | 7 | 7 | 7 |
| Collar Length - Top Edge | 5/5 | 43.6 | 44.4 | 45.2 | 46 | 47.2 | 48.4 | 49.6 | 50.8 | 52 |
| Across Back Neck (HSP to HSP) | 5/5 | 16.8 | 17.2 | 17.6 | 18 | 18.6 | 19.2 | 19.8 | 20.4 | 21 |
| Across Front Mid-Armhole or Yoke | 5/5 | 32 | 33 | 34 | 35 | 36.2 | 37.4 | 38.9 | 40.4 | 41.9 |
| Across Back Mid-Armhole or Yoke | 5/5 | 34 | 35 | 36 | 37 | 38.2 | 39.4 | 40.9 | 42.4 | 43.9 |
| Half Bust at Underarm | 5/5 | 41 | 43 | 45 | 47 | 49.5 | 52 | 55 | 58 | 61 |
| Half Waist (41cm down) | 5/5 | 36 | 38 | 40 | 42 | 44.5 | 47 | 50 | 53 | 56 |
| Half Hem Width - Straight Across | 5/5 | 40.5 | 42.5 | 44.5 | 46.5 | 49 | 51.5 | 54.5 | 57.5 | 60.5 |
| Shoulder Seam ex Neck Trim | 5/5 | 11.1 | 11.4 | 11.7 | 12 | 12.3 | 12.6 | 12.9 | 13.2 | 13.5 |
| Long Sleeve Length (including Cuff) | 5/5 | 60.8 | 61.2 | 61.6 | 62 | 62.4 | 62.8 | 63.2 | 63.6 | 64 |
| Half Armhole (Diagonal) | 5/5 | 18.6 | 19.4 | 20.2 | 21 | 21.8 | 22.6 | 23.4 | 24.2 | 25 |
| Half Bicep at Underarm Pt | 5/5 | 14.6 | 15.4 | 16.2 | 17 | 17.8 | 18.6 | 19.4 | 20.2 | 21 |
| Half Cuff Width (Long) | 0/0 | 10.5 | 11 | 11.5 | 12 | 12.5 | 13 | 13.5 | 14 | 14.5 |
| Front Length (from HSP) | 10/10 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 |
| C/Back Length from Neck Seam | 10/10 | 51.5 | 52.5 | 53.5 | 54.5 | 55.5 | 56.5 | 57.5 | 58.5 | 59.5 |
| Zip Length | 0/0 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 |
Specification