Haining Idol Imp. & Exp. Co., Ltd.
HAINING IDOL IMP. & EXP. CO.,LTD
Add to Cart
Ladies' light wash stretch denim Belted skinny jeans TW72964
Trims List
| Trim | Position | Quantity | Size | Color |
|
Zip
|
CFfly | 1 | #3 | antique brass |
|
Branded Button
|
CF waistband | 1 | 2cm | brushed sliver |
|
Branded Rivet
|
front pocket, back pocket | 8 | 0.9cm | brushed sliver |
|
Unbranded rivet
|
front pocket | 2 | 0.7cm | matt sliver |
|
Diamante rivet
|
front pocket, back pocket | 4 | 0.7cm |
brushed sliver with clear diamante |
|
Ingot
|
ticky pocket | 1 | 1.5x0.5cm | matt sliver |
|
Ingot
|
RSW back pocket | 1 | 3x1cm | matt sliver |
|
pu belt
|
1 | 3cm wide |
sliver pu with brushed sliver buckle |
Product Specification
|
Branding:
|
OUTBACK RED | Material composition: |
70%cotton 28%polyester 2%elastane |
| Fabric weight: |
11-12oz
|
Size range: | Europe or USA size, customized |
|
Garment Care:
|
Machine washable | Length: | 75cm in-leg |
|
Size type:
|
super skinny | Treatment: |
enzyme bleach+ hand sanding |
Description
Front:
- To be in a light wash - see attached level
- Thread colour to be milk and light blue
- All hardware to also be brushed silver with branding
- CF button to be OBR branded and brushed silver as attached.
- Waistband to have highs and lows.
- To have kimbling on side seam below pocket, no kimbling in centre of pocket mouth
- Keep front fork whiskers
- Waistband to be 4.3cm and twin needle bottom edge of waistband
- Front ticky pocket to be as per attached pic with branded ingot on the front
- To have 1 x branded rivet and 1 x diamante rivet on bottom edge of pocket mouth underneath each other
- Stitching around the pocket mouth to be as attached - 1 x row prick stitch 1 x row normal
- Inleg to be 75cm rolled up to 70cm - super skinny
- Fly front and front rise to be twin needeled
- To have staystitch on sideseam
- Twin needle inleg
- Front panels to be blasted
Wash:
- To be light wash with blasting as image.
Belt:
- Belt to be coated sliver in pu quality with pin-punched.
- buckle colour to be brushed sliver
- Belt to be 3cm in width
Back:
- Back pockets - to be twin needled
- To have profile stitch - 1 x row prick stitch 1 x row normal, design as image.
- To have 2 x normal OBR rivet on outer corners with diamante rivets below the rivet closest to the sideseam.
Inside:
- With branding inside waistband embroidery
All hardware to be branded in matt sliver.
All topstitching to be thick thread.
Measurement
| MEASUREMENTS | Tolerances | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 40 | 42 |
| Waistband depth | 0/0 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 |
| Half Waist Relaxed | 10/10 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38.25 | 39.5 | 40.75 | 42 | 45.5 | 50 |
| Half Hip (8cm below top of waist) | 10/10 | 36.5 | 37.5 | 38.5 | 39.5 | 40.5 | 41.5 | 42.5 | 43.75 | 45 | 46.25 | 47.5 | 51 | 55.5 |
| Half hip (at base of fly) | 10/10 | 38 | 40 | 40 | 41 | 42 | 43 | 44 | 45.25 | 46.5 | 47.75 | 49 | 52.5 | 57 |
| Front rise (including waistband) | 5/5 | 19.8 | 20 | 20.4 | 20.8 | 21.2 | 21.6 | 22 | 22.5 | 23 | 23.5 | 24 | 25.5 | 27 |
| Back Rise (including waistband) | 5/5 | 31.3 | 31.5 | 31.9 | 32.3 | 32.7 | 33.1 | 33.5 | 34 | 34.5 | 35 | 35.5 | 37 | 38.5 |
| Half Fork | 10/10 | 22.5 | 23 | 23.5 | 24 | 24.5 | 25 | 25.5 | 26.3 | 27.1 | 27.9 | 28.7 | 30.7 | 32.7 |
| Half Knee (30cm below fork point) | 10/10 | 14 | 14.5 | 15 | 15.5 | 16 | 16.5 | 17 | 17.5 | 18 | 18.5 | 19 | 20.2 | 21.4 |
| Inside Leg Unrolled | 10/20 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 |
| Fly Placket | 0/0 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 |
| Zip Length | 0/0 | 6.5 | 6.5 | 6.5 | 7 | 7 | 7.5 | 8 | 8.5 | 8.5 | 9 | 9 | 9.5 | 10 |
| Inside Leg rolled | 0/0 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 |
| Belt Width | 0/0 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Half leg hem (long) | 0/0 | 12.5 | 12.5 | 13 | 13 | 13.5 | 13.5 | 14 | 14.3 | 14.6 | 14.9 | 15.2 | 15.9 | 16.6 |
| Belts number of holes | 0/0 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Belts spacing of holes | 0/0 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Belts first hole to tip of belt | 0/0 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 |
| Belt Length Inside edge buckle to Centre | 0/0 | 77 | 79 | 81 | 83 | 85 | 87 | 89 | 91.5 | 94 | 96.5 | 99 | 106 | 115 |
| Belt length - Inside edge buckle to end of belt | 0/0 | 94 | 96 | 98 | 100 | 102 | 104 | 106 | 108.5 | 111 | 113.5 | 116 | 123 | 132 |
Specifications
Material: T/C or CVC, customized
Color: Customized
Pattern: Customized or Designed by our factory
Payment terms: T/T, L/C
Delivery Time: Around 35 days after sample approved for production.
Sample delivery: 7-10 working days
MOQ: 1000 pcs
Packing: 1pcs/PE bag, 30pieces/Carton, or as per client's requirement
Carton size: 55*34*30cm for 30pcs/carton