Tan Color Mens PU Jacket / Biker Coat With Metal Zip Through XS-XXL TW76239

Menswear metal zip through tan upstyled pleather biker jacket with suede detail TW76239

Description

Trims list

Styling Details

Front:

- collar to be 4cm wide, finished with a foot stitch onthe top and bottom edge
- front collar to have a polished silver STUDIO branded metal popper button
- shoulders to have a multi stitch detail panel
- panel shaping to be diagonal in the front and the back as per CAD
- shoulder panel stitch lines to be 2cm apart - to use thicker top stitch thread
- front shoulder to have 2cm wide DTM tan suedette fabric strip placed infront of the cut line
- front top chest to to be in pin punch tan PU
- front chest to have 2x diagonal cut lines on either side, placed 6am apart, finished with a twin needle stitch
- both top and bottom cut line to have a 2cm wide tan suedette strip placed below the cut line
- front chest to have zip pockets placed in between the chest cut lines
- zips to be finctional zip pocket
- zips to be #5 polished silver metal zips with polished silver STUDIO branded zip pullers.
- chest zip to be semi concealed with filled piping in solid PU body fabric
- CF front closure to be a zip closure in #5 polished silver metal zip with polished silver STUDIO branded zip puller
- add on a 2cm wide tan suedette strip onto either side of the zip, finished with an edge stitch
- front body to have 2x diagonal cutlines on either side as per CAD
- 1st cutline should start at the mid arm hole and end at the bottom welt
- 2dn cutline should start in the cuest cutline and also end at the bottom welt
- cut lines should be positioned +- 8cm apart, finished with a twin needle stitch
- side panel fabric to be in tan pin punch PU fabric as per CAD
- bottom side enty pockets to be positioned in between the 2x vertical cutlines as per CAD
- pocket to have a laid on solid PU border around the zip opening
- zips to be #5 polished silver metal zips with polished silver STUDIO branded zip pullers
- bottom welt to be finished with a twin needle stithc on the top ende and a foot stitch on the bototm edge
- sleeves to be long sleeve
- sleeve head to have a laid on multi stitch panel as per shoulder panel
- stitch lines to be placed 2cm apart

- sleeve cuff to be finished with a twin needle stitch on the top edge and a foot stithc onthe bottom edge
- sleeve to have polished sliver snap

Back:

- back yoke to have multi row stitch detail as per CAD, placed 2cm apart
- back yoke to have a 2cm wide tan suedette strip placed on the bottom edge of the yoke
- Tan suedette strip to follow through onthe the back sleeve cutline
- back body to have a diagonal cutline on either side fron the yoke seam down to the back bottom detail, finished with a twin needle stitch
- side panel to be in tan pin punch PU fabric
- back bottom panel shaping to be as per CAD, finished with horizontal stitch detail, 2cm apart
- bottom welt finsihed with a twin needle stitch on the top edge and a foot stitch on the bottom edge

Inside:

- inside body to be lined with navy pin dot poly fabric
- inside piping to be in white poly piping
- inside LHSW to have a welt pocket in body fabric

Mearsurement

Specification